Cookie Img

INSTRUCTION BOARD FOR CHARGING SYSTEM

INSTRUCTION BOARD FOR CHARGING SYSTEM
INSTRUCTION BOARD FOR CHARGING SYSTEM
Product Code : MTX06
Product Description

INSTRUCTION BOARD FOR CHARGING SYSTEM.

The Instruction board adopts the real components of charging system to illustrate charging system structure and working principle. The components are rigged onto colour circuit diagram. And made functional.

Features

  1. Real and operatable Charging system such as alternator, meters etc is assembled onto a colour printed board to illustrating the structure and working process .

  2. The alternator will be coupled electric motor, and the necessary electrical circuitry will be provided along with warning lamp, ignition switch, voltage meters etc., to demonstrate the working of charging system.

  3. And exploded view arrangement of an alternator assembly will be displayed on the board.

  4. Coloured circuit diagram on the training Module printed on to 6mm organic glass base. Where in the students can compare the diagram and actual diagram.

  5. Detection terminals for operator to detect various sensors, actuators, electrical signals for engine control unit, such as resistive, voltage, current , frequency and wave form signals are provided on to the printed circuit diagram.

  6. Fault setting switch bank will be provided to induce faults in the training module to demonstrate the fault and to diagnose faults.

  7. Set the line break, grounding short circuit, improper contact or open circuit faults can be induced, user can adjust the number and type of faults.

  8. The training module is fabricated using steel pipe frame with spray painted for good looks and the entire setup is provided with caster wheels with brakes for easy movement OF THE SAME .

INSTRUCTION BOARD FOR CHARGING SYSTEM.

The Instruction board adopts the real components of charging system to illustrate charging system structure and working principle. The components are rigged onto colour circuit diagram. And made functional.

Features

  1. Real and operatable Charging system such as alternator, meters etc is assembled onto a colour printed board to illustrating the structure and working process .

  2. The alternator will be coupled electric motor, and the necessary electrical circuitry will be provided along with warning lamp, ignition switch, voltage meters etc., to demonstrate the working of charging system.

  3. And exploded view arrangement of an alternator assembly will be displayed on the board.

  4. Coloured circuit diagram on the training Module printed on to 6mm organic glass base. Where in the students can compare the diagram and actual diagram.

  5. Detection terminals for operator to detect various sensors, actuators, electrical signals for engine control unit, such as resistive, voltage, current , frequency and wave form signals are provided on to the printed circuit diagram.

  6. Fault setting switch bank will be provided to induce faults in the training module to demonstrate the fault and to diagnose faults.

  7. Set the line break, grounding short circuit, improper contact or open circuit faults can be induced, user can adjust the number and type of faults.

  8. The training module is fabricated using steel pipe frame with spray painted for good looks and the entire setup is provided with caster wheels with brakes for easy movement OF THE SAME .

Contact Us

Plot No. 95, Behind Omex Auto, Bommasandra Jigani Link Road, Jigini Post, Bengaluru, Karnataka, 562105, India
Phone :91-8110-414385