INSTRUCTION BOARD FOR IGNITION SYSTEM.
The Instruction board demonstrates two different types of ignition system in one boards with colour circuit diagrams. The structure and operation of the systems can be explained, with the difference of Conventional ignition system and electronic ignition system.
Real and operatable ignition system with partial engine block is assembled onto a colour printed board to illustrating the structure and working process .
Coloured circuit diagram on the training Module printed on to 6mm organic glass base. Where in the students can compare the diagram and actual diagram.
Detection terminals for operator to detect various sensors, electrical signals for control unit, such as resistive, voltage, current and wave form signals are provided on to the printed circuit diagram.
Fault setting switch bank will be provided to induce faults in the training module to demonstrate the fault and to diagnose faults.
Set the line break, grounding short circuit, improper contact or open circuit faults can be induced, user can adjust the number and type of faults.
Good working condition Parts will be provided with fuel tank. The instruction board has to be connected to 220V AC socket Which changes to 12V DC internally, so that the board works without battery.
The training module is fabricated using steel pipe frame with spray painted for good looks and the entire setup is provided with caster wheels with brakes for easy movement of the same.